BASS BARN banner
1 - 3 of 3 Posts

· Registered
766 Posts
Chaz, Be careful sticking a small piece of wire in that 225 Flush out port hole.Take a piece of plastic or coffee stirer and insert it to clean the stuff that might have hardened over the winter. I use to use the wire until some one told me about the plastic thing.
If the motor is running and no water is comming out of the Flush out port or center of the prop consider the pump or impellar.
If you have the ear muffs on and water is comming out the prop and lower unit holes(two )then look at that flush port again and clean.
Hope this helps to some degree.
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.