BASS BARN banner
1 - 20 of 21 Posts

·
Registered
Joined
·
5,609 Posts
Discussion Starter · #1 ·
The first is what I believe is a 2000 200hp Saltwater Carburated Mercury. OT101616, 2000, 200XLSW this is a 25" outboard. Clean with all the rigging and stainless steel wheel. $4,000.00

The second is a 1998 Evinrude 225 Ocean Pro. This is a carburated 25" shaft outboard. No controls or prop. $4,500.00

The third is a 1996 Evinrude 200 Ocean Pro This is a carburated 25" outboard. Had a new powerhead installed in 1999. 3 blade stainless steel wheel $4,500.00

The fourth is a 1998 130 Johnson. It is a carburated 20" shaft outboard. $4,000.00


[ 04-09-2006, 08:03 PM: Message edited by: barnaclebillsmarine ]
 

·
Registered
Joined
·
3,639 Posts
Barners,the 225 Ocean runner runs like a champ,has around 600 hrs on it,has new water pump thermostats on it last year Motor has never be negleted,all work has been done by Barnacle Bills, if you have any questions about the 225,please e-mail me.
 

·
Registered
Joined
·
3,639 Posts
MM,I repowered with a new 250hP E-Tec-Joe already did a trial run,around 43 mph.If you need a motor and dont have alot of cash,this is a bargin compared to repowering. I always have taken good care of this motor,is a reliable engine.
 

·
Registered
Joined
·
59 Posts
Now come on Bill, I said I needed twin 200's not just one. Just kidding. But if you happen to come across twin counter rotating 200 DI's 2000 or newer, let me know. Thanks.
 

·
Registered
Joined
·
168 Posts
Bill,I had a 225hP Ocean runner great motor, ran Strong' but always had some difficulty Starting it . Any way of making carburated motors start easier?
 

·
Registered
Joined
·
1,064 Posts
The Evinrude 200 is a 98 but bought new in 99 so it has six seasons on it with about 600 hours. The engine was serviced by King Marine every spring and summer and all the service records are available. The engine runs great but I wanted a little more power for my Stratos 2160 and Barnicle Bill made me a nice deal for a new 225 ETEC. If you need any additional informaiton on the engine, shoot me an email.
 

·
Registered
Joined
·
3,639 Posts
Jim.this motor has always been easy to start. You should replaced your motot with the 225,Pt sat over for 3 weeks and fired right over. ;)
 

·
Registered
Joined
·
168 Posts
bill,upon pushing the key in (choke),i do not hear anything...The engine would end up flooded about half the time we start that motor
 

·
Registered
Joined
·
5,609 Posts
Discussion Starter · #14 ·
TTT. We still have the pair of 225 Mercury Opti Max outboards also that are listed on another post. These are great deals on these enignes.

Also comming in a late model 225 Evinrude with all the rigging. Engine is comming off a 24' Hydra Sports. Pictures will be posted after it comes in.

[ 03-13-2006, 08:32 PM: Message edited by: barnaclebillsmarine ]
 

·
Registered
Joined
·
5,609 Posts
Discussion Starter · #17 ·
Still have the outboards listed above. More will be listed soon. Due into us is a 90hp, 28hp, 200hp and a very clean 225hp. All are Evinrude/Johnsons. Not sure of years yet. Best enigne in stock so far is the 225 and the 200 pictured above. (856) 785 9455.
 

·
Registered
Joined
·
4,715 Posts
Does price include installation? Just curious. Thanks.
 
1 - 20 of 21 Posts
Top