BASS BARN banner
1 - 2 of 2 Posts

·
Registered
Joined
·
166 Posts
Discussion Starter · #1 ·
I am a mechanic at a small marina and have a 38' fountain with 3 2007 275hp verados that came in during the fall with motor oil leaking out of the water intakes on the lowers, the drive shafts are stained with oil and it is defiantly leaking around the drive shafts .... the local merc guy/dealer really is not giving me much info on it but as it appears the seal at the crank shaft is leaking engine oil down the shaft and it is setting on the water pump and running out the water intakes.... i should have the first powerhead off tomorrow but my question is that i'm not really sure that that is all that is causing the oil leak these motors are very over completed i just wanna be sure that the crank seal is the only thing i'm going after.... and that here is not something else that would cause this issue that i am not aware of...
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top